Pozzani No10 Aquarium Nitrate Reduction Filter System

In stock
Only %1 left
SKU
NO10AQNR
Rating:
92 % of 100
As low as £34.95

Nitrates are present in most tap water to some degree, mainly derived from pesticides and decaying organic matter.

This filter is intended for tank filling only. It is not intended to be used as a circulating filter.

The replacement cartridges for this system are the NR600 cartridges which can also be found on our website

This filter system is supplied with hozelock compatible fittings

Important Note:
The life of the filter is proportional to the loading of Nitrate (NO3) and Sulphate (SO4) in the source water and the volume of water used. The more Nitrate and Sulphate in the source water and the more water you use, the faster the filter will exhaust. If you require advice prior to purchasing please contact us.

 

Nitrates are present in most tap water to some degree, mainly derived from pesticides and decaying organic matter. Nitrates, which are toxic to fish, are broken down in tropical aquariums by bacteria, which then convert them into harmless compounds.

Levels in excess of 20ppm (parts-per-million) may cause harm to your fish, and tap water can contain upto 50ppm. Therefore, in order to minimise the stress caused to the fish, many people choose to remove nitrates prior to filling or topping up their tanks. This also helps the bacteria break down the nitrates present in your tank's filter and gravel bed as the level that they have to deal with remains manageable.

Prior to purchasing this system it is recommended that you check the level of nitrates in your mains supplied water. This system is designed for people who have high nitrate levels in excess of 20ppm.

This filter is intended for tank filling only. It is not intended to be used as a circulating filter.

The replacement cartridges for this system are the NR600 cartridges which can also be found on our website

This filter system is supplied with hozelock compatible fittings, but you can select the fitting kit option which is for mains pipe work. The fitting kit will provide you with a saddle valve to pierce the copper pipe and a 10m length of tube to attach the output.

Important Note: The life of the filter is proportional to the loading of Nitrate (NO3) and Sulphate (SO4) in the source water and the volume of water used. The more Nitrate and Sulphate in the source water and the more water you use, the faster the filter will exhaust. If you require advice prior to purchasing please contact us.

More Information
Manufacturer Pozzani
Write Your Own Review
You're reviewing:Pozzani No10 Aquarium Nitrate Reduction Filter System
Your Rating