Pozzani No.10 1 Micron Sediment Filter (10" Slimline)

Pozzani No.10 1 Micron Sediment Filter (10" Slimline)

Part Code: S10M01

In stock

This Pozzani No.10 sediment filter removes dirt, sediment, rust and other solids down to 1 micron using a spun polypropylene filter, which has a high capacity for solids, yet is easily and economically replaced.
  £5.50
Description

This Pozzani No.10 sediment filter removes dirt, sediment, rust and other solids down to 1 micron using a spun polypropylene filter, which has a high capacity for solids, yet is easily and economically replaced.

(If you are unsure of the rating required, we suggest you start with a 5 micron cartridge.)

This is a simple to use in-line water filter cartridge with a maximum pressure of 150 psi (11bar) and a maximum temperature of 60 degrees centigrade.

This cartridge will fit any standard Ametek No10 or compatible 10 housing including systems manufactured by Liff and Culligan (250mm cartridges with 1" ports/holes at either end).

The Pozzani No10 sediment water filter is designed to be a direct replacement for the Liff NSW1 cartridge that fits inside the Liff NP1, NDL2 or NCP1 10 water filter housings.

The Pozzani No10 cartridge filters down to 1 micron.

The Pozzani No10 cartridge removes sediment from water and can be installed on the incoming main if required.

CHANGING YOUR FILTER CARTRIDGE.

It is recommended that Pozzani No10 sediment water filter cartridges are changed at least every 6 months but on occasions it may be necessary to change the water filter cartridge more frequently.

Reviews
Specification
Delivery
Returns